We use just a regular sealant in the shop, never had any issues with it ever.
Just make sure to clean the parts, thats more important than the brand.
Especially working on parts still attached to the machine i encountered oil leaking on the sealant before mounting it.
I got into the habit that if it does not go onto a pump or hydraulics i slather both sides royally, wait to get slighty tacky and then i add a little bit to the underside of the part (as oil leaks mostly down and not up 🙂 ) and just assemble it in one swoop, ram in 2 bolts on opposite ends and then you can relax and put the rest in.
Nothing is worse than the possibillity of oil running over the sealant and maoing it runny