John Deere Gator Forums banner

Steering 835r

5K views 8 replies 4 participants last post by  200mph 
#1 ·
im new to forum. Anyone ever replaced rack and pinion assembly on 835r with hvac
 
#4 ·
My dealer done mine under warranty and he told me it was quite a job. He said he had to remove a lot of stuff
Do you have a copy of the Technical Manual for your Gator? If not they can be very helpful, Deere has them and I believe you can purchase them through eBay as well. Make sure you purchase the correct manual for your PIN.

I did replace mine on the 825, with guidance from the manual.
No tech manual but finally got assembly removed. Have to remove entire front, radiator, cooling fans , opened up for good access. About a 2 hr job.
 
#3 ·
Do you have a copy of the Technical Manual for your Gator? If not they can be very helpful, Deere has them and I believe you can purchase them through eBay as well. Make sure you purchase the correct manual for your PIN.

I did replace mine on the 825, with guidance from the manual.
 
#9 ·
  • Like
Reactions: Bradhill
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top