John Deere Gator Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1
Can someone with a service manual for a 2014 825i please look up the torque spec for the front a-arm ball joints.

Also would someone be kind enought to check and see if they have cotter pins or lock wire in the ball joint studs above the lock nut on those ball joints...

Thanks John....:)
 

·
Registered
Joined
·
250 Posts
ItemMeasurementSpecification
Ball Joint to Suspension Arm Lock NutTorque 54 N·m (40 lb.-ft.)
Caliper Sliding Pins to Steering KnuckleTorque 46 N·m (34 lb.-ft.)
Tie Rod End to Steering Arm NutTorque 54 N·m (40 lb.-ft.)
Axle Castle NutTorque 170 +119/-23 N·m (125 +88/-17 lb.-ft.)
Wheel Lug Bolt (Alloy Wheel)Torque 142 N·m (105 lb.-ft.)
Wheel Lug Bolt (Steel Wheel)Torque 108 N·m (80 lb.-ft.)

No cotter pin above lock nut.
 
1 - 7 of 7 Posts
Top